Nederlands
English
Deutsch
Français
Book a test cut
The PJ-8-4000, our most powerful pump.
The PJ-8-4000 is the most powerful pump of the PJ series: up to 7.6 l/min at 4,000 bar, driven by two intensifiers and 75 kW. Built for high-flow cutting and for feeding several cutting heads at once.
From 200 bar of oil to 4,000 bar of water.
Every PJ pump works on the intensifier principle: a hydraulic oil pressure of about 200 bar is converted into a water pressure up to 4,000 bar. The PJ-8-4000 puts two intensifiers on that, driven by a water-cooled 75 kW electric motor. This pump is water-cooled; air cooling is on request. It therefore delivers up to 7.6 l/min, enough for high-flow cutting and for feeding several cutting heads at once. If you need more power later, you combine pumps until you have the capacity you are looking for. If you need less flow, look at the PJ-2-4000 or the PJ-4-4000.
- 2 pressure boosters (intensifiers) for 7.6 l/min at 4,000 bar
- Water-cooled 75 kW electric motor
- Pumps combinable for more power
Service from the manufacturer itself.
In the event of a fault we are with you within 72 hours, in urgent situations often within 24. Maintenance, helpdesk and the Resato Academy come from the same people who built your machine.
Send us your material,
we will cut it.
Tell us what you cut and in what volumes. We cut your material on the machine that fits it, and one of our colleagues turns that into a configuration and a realistic quotation.
Prefer to call? +31 (0)50 501 6877 or sales@resato-waterjet.com