Book a test cut
Industries we cut for Natural stoneGranite, quartz composite, ceramics CompositeCFRP & GFRP, without delamination MetalStainless, steel, aluminium, titanium Cutting service providersCustom work, short lead times OEMSeparate components & customisation GlassStandard, tempered and laminated FoamAcoustic foam, insulation, gaskets Maintenance & workshopsRepairs and replacement parts
Waterjet cut detail in stainless steel Without heat input

One process, almost any material

From granite to titanium, from 1 to 200 mm thick, without heat input and without changing tools.

All industries
Machines & components Cutting systemsSix building blocks, one cutting system Cutting heads2D & 2.5D cutting heads + head options Cutting tableWorking areas, Flex-Zone & options Abrasive managementSupply, feeder & removal system Control unitResato HMI & IGEMS CAD/CAM PumpsPJ-series, up to 4,000 bar
Resato ACM waterjet cutting machine Built in Assen

Configure your waterjet

Choose table, cutting head and pump, designed as one system and serviced by one team.

View the cutting system
Service & support MaintenancePlanned & preventive maintenance HelpdeskRemote diagnosis when something stops AcademyTraining on product, software and safety
Servicing a Resato waterjet cutting machine Uptime first

Service from the manufacturer itself

Our own engineers, parts from our own stock. In the event of a breakdown we log in to the machine directly and assess its status.

All services
Knowledge articles How does waterjet cutting work?Abrasive vs. pure water Knowledge baseWaterjet cutting explained References MerfordAcoustic solutions · NL KLu WoensdrechtDefence · NL Junge steindesignStone working · DE AFWCustom metal · NL
Waterjet cutting in practice References

Four sectors, one cutting technique.

From acoustics and defence to stone working and custom metal: companies large and small cut with it every day.

All knowledge & references
About Resato Waterjet General infoWho we are & what we do CareersVacancies and open applications
Resato waterjet cutting machine at a customer site Under one roof

Designed & built in Assen

One team, from the first sketch to lifelong support.

Get to know Resato
info@resato-waterjet.com +31 (0)50 501 6877 Resato Wiki
Book a test cut
Solutions

More from less abrasive.

Abrasive is a recurring cost in cutting. Our systems feed it in, dose it accurately to the cutting head and take it back out of the water tank. That accurate dosing saves up to 25% abrasive, and the continuous supply system lets your machine simply keep cutting overnight.

Four systems

Feed, dose,
remove.

Book a test cut
The upgraded abrasive feeder with its transparent supply cylinder.

Feeder

The upgraded feeder doses the abrasive accurately to the cutting head, with a buffer for an even supply during cutting.

At the cutting head
The RS3 abrasive removal system with collection bin and connections, free-standing.

Removal system (RS3)

Automatically takes the used abrasive out of the cutting table's water tank, so you no longer shovel the tank empty by hand.

From the water tank
The abrasive continuous supply system (ABR-CS) on its frame, shown free-standing.

Continuous supply system (ABR-CS)

Tops up the abrasive automatically and without interruption, so the machine keeps cutting unmanned as well.

For unmanned cutting

Abrasive vessels

If you choose the continuous system, a 2,000 kg vessel comes with it, about one big bag of abrasive. If you do not, we supply a 300 kg vessel.

300 or 2,000 kg
Up to 25% less Resato abrasive feeder, 2025 version.
Why it pays off

Less consumption, longer unmanned.

The feeder doses no more abrasive to the cutting head than is strictly needed. That comes from the electronic dosing in the feeder, combined with the advanced vacuum-controlled mixing chamber in the cutting head. Compared with simpler supply systems that work with vacuum control alone, you use up to 25% less abrasive, a cost that returns with every running hour. On top of that, the continuous supply system keeps the machine going overnight, and the removal system takes the abrasive out of the water tank instead of someone shovelling it empty by hand. So you get more running hours out of the same machine, without adding staff.

  • Up to 25% lower abrasive consumption through accurate dosing
  • Continuous supply for unmanned cutting, including overnight
  • Takes abrasive out of the water tank automatically
Book a test cut
Service

Service from the manufacturer itself.

In the event of a fault we are with you within 72 hours, in urgent situations often within 24. Maintenance, helpdesk and the Resato Academy come from the same people who built your machine.

View our service
Book a test cut

Send us your material,
we will cut it.

Tell us what you cut and in what volumes. We cut your material on the machine that fits it, and one of our colleagues turns that into a configuration and a realistic quotation.

Send in your material and drawing
You speak to an engineer, not a sales script
Service and parts straight from us as the manufacturer

Prefer to call? +31 (0)50 501 6877 or sales@resato-waterjet.com