Book a test cut
Industries we cut for Natural stoneGranite, quartz composite, ceramics CompositeCFRP & GFRP, without delamination MetalStainless, steel, aluminium, titanium Cutting service providersCustom work, short lead times OEMSeparate components & customisation GlassStandard, tempered and laminated FoamAcoustic foam, insulation, gaskets Maintenance & workshopsRepairs and replacement parts
Waterjet cut detail in stainless steel Without heat input

One process, almost any material

From granite to titanium, from 1 to 200 mm thick, without heat input and without changing tools.

All industries
Machines & components Cutting systemsSix building blocks, one cutting system Cutting heads2D & 2.5D cutting heads + head options Cutting tableWorking areas, Flex-Zone & options Abrasive managementSupply, feeder & removal system Control unitResato HMI & IGEMS CAD/CAM PumpsPJ-series, up to 4,000 bar
Resato ACM waterjet cutting machine Built in Assen

Configure your waterjet

Choose table, cutting head and pump, designed as one system and serviced by one team.

View the cutting system
Service & support MaintenancePlanned & preventive maintenance HelpdeskRemote diagnosis when something stops AcademyTraining on product, software and safety
Servicing a Resato waterjet cutting machine Uptime first

Service from the manufacturer itself

Our own engineers, parts from our own stock. In the event of a breakdown we log in to the machine directly and assess its status.

All services
Knowledge articles How does waterjet cutting work?Abrasive vs. pure water Knowledge baseWaterjet cutting explained References MerfordAcoustic solutions · NL KLu WoensdrechtDefence · NL Junge steindesignStone working · DE AFWCustom metal · NL
Waterjet cutting in practice References

Four sectors, one cutting technique.

From acoustics and defence to stone working and custom metal: companies large and small cut with it every day.

All knowledge & references
About Resato Waterjet General infoWho we are & what we do CareersVacancies and open applications
Resato waterjet cutting machine at a customer site Under one roof

Designed & built in Assen

One team, from the first sketch to lifelong support.

Get to know Resato
info@resato-waterjet.com +31 (0)50 501 6877 Resato Wiki
Book a test cut
Industries

One table that moves with you.

As a cutting service provider or subcontractor you never face the same job twice. A gasket one day, a sheet of stainless steel or a rush order in a completely different material the next. A waterjet cuts that custom work without heat input, in almost any material, so you can switch quickly and keep lead times short.

Varied work Worker placing a sheet on the cutting table using a crane-mounted vacuum lifter.
The challenge

Varied work, short deadlines.

Your strength is that you can handle almost anything: small batches, one-off bespoke work, a rush order in between. But every job calls for a different material and a different approach, and the customer wants it fast. With traditional tooling that usually means retooling, waiting or outsourcing. A waterjet cuts the drawing directly, without changing tools for each material.

  • From a single piece to small batches, without a jig or die
  • Rush orders and bespoke work with short lead times
  • Almost any material on the same table, without retooling
Why a waterjet fits

Switch faster, take on more work.

A waterjet gives you one cutting table that handles widely varying work. You load a new drawing, choose your material and cut, without mechanically reconfiguring the machine. Resato cites the example of a five-minute lead time with the waterjet, against more than an hour with punching and dies.

Because the cut is made without heat input, your material keeps its mechanical properties and finishing stays limited. That way you take on work you previously had to turn down or outsource.

View the machines
Three benefits
01Switch quicklyNew job? Load the drawing and cut, without changing tools for each material.
02One table, plenty of workMetal, natural stone, ceramics, composite, glass, plastic and foam on the same cutting table.
03Less outsourcingMore materials and operations in your own hands, so more margin and more control over your planning.
1–200mm Material thickness
40+ Materials
0heat Heat input
4,000bar Max. pump pressure
Customer in practice

A family business that cuts almost everything itself

That waterjet has given us so many more possibilities. The flexibility you create with it is unmatched; you really can do everything yourself.

Apparaten Fabrikage Waalwijk (AFW) makes custom metalwork in small batches and handles maintenance and overhaul for the LNG and hydrogen sector. Since bringing a Resato waterjet in-house, they cut a far wider range of materials themselves, from metals to fibre-reinforced plastics, and no longer outsource custom work. Even special metallurgical blades that cannot withstand laser heat are cut without any trouble. If something does go wrong, a technician is usually ready within one to two days.

Sector
Custom metal · LNG & H₂
Location
Waalwijk, the Netherlands
Work
Small batches, up to 50 pieces
Wim van der Wilk Apparaten Fabrikage Waalwijk
Cutting table with a white sheet from which round and elongated parts have been cut.
Book a test cut

Send us your material,
we will cut it.

Tell us what you cut and in what volumes. We cut your material on the machine that fits it, and one of our colleagues will translate that into a configuration and a realistic quotation.

Send us your material and drawing
You speak to an engineer, not a sales script
Service and parts directly from us, the manufacturer

Prefer to call us directly? +31 (0)50 501 6877 or sales@resato-waterjet.com